Tenergy 5-in-1 Intelligent Cell Meter

Description

Cell Meter – 5 functions in 1 !

Battery Capacity checker – can display the estimated capacity and voltage for LiPo / LiFeP04 / Li-ion / NiCd / NiMh battery packs.   For lithium based battery packs,  it can also display the voltage of each cell

Battery Balancer – check that your individual cells are balanced to optimize the performance and life of your battery

Battery Discharger – discharging your lithium based battery packs prior to charging can improved their runtime.  Cell meter discharges packs to an adjustable threshold at a discharge rate of 180mA.

Battery Internal Resistance Tester –  for lithium based battery packs, the internal resistance for each cell can be displayed so you know when to replace it.

ESC/SERVO/PPM Tester – supply a reliable PPM signal to test and adjust your servo motors.

Can use with  NiMh/NiCd packs of 4-7 cells and with LiPo/Li-ion/LiFeP04 packs of 1-7 cells
energy 5-in1

Cell Meter uses the test battery as a power source (does not require outlet adapter).

Li-ion/LiPo/LiFePO4 hobby battery packs NEED a balance connector in order to be tested.

NiMH/NiCd battery packs NEED a Hitech/Futaba connector, or an adapter, in order to be tested.

Li-ion/LiPo/LiFePO4 battery packs without a balance connector CAN NOT be tested.

Tenergy 01444_manual